By
Share This :
A plain-English guide to borehole surveys, borehole logging and surface geophysics for groundwater, with tips on siting, testing, water quality and choosing a qualified consultant.

Borehole Surveys and Groundwater Geophysics: The Complete Guide

Imagine drilling for water and hitting dry rock at 80 metres. It is expensive, disappointing and surprisingly common. A borehole survey is how careful teams avoid that outcome. It measures what the ground is made of, how it holds and moves water, and where the best target is, before the drill rig arrives.

The short answer: a borehole survey combines surface geophysics to choose the drilling location, with measurements taken inside the hole (called borehole logging) to understand the layers, water-bearing zones and water quality. Together, they help you choose where to drill, how deep to go and what to expect from the water.

In this guide:

What a borehole survey actually includes

A borehole survey is not one test. It is a set of linked activities, each answering a different question:

  • Desk review: existing well records, geological maps and local water use.
  • Surface geophysics: finding the most promising place to drill.
  • Drilling and sampling: recovering material to see the layers in real life.
  • Borehole logging: lowering instruments into the hole to measure properties continuously with depth.
  • Testing: pumping or recovery tests to estimate how much water the aquifer can give.

Skip any one of these and you are guessing at the part you skipped.

Reading the walls of the hole

Borehole logging is one of the most useful tools in groundwater work, and it has a surprisingly old pedigree. Most texts credit the Schlumberger brothers with developing the first geophysical logs in France in 1927, and they made the first resistivity logs by hand. Today’s instruments are far more capable. Common logs include caliper, gamma, single-point resistance, spontaneous potential, normal resistivity, electromagnetic induction, fluid resistivity, temperature, flowmeter, television and acoustic televiewer.

The table below shows the logs most often used when the question is water.

Log What it measures Why it matters for water
Gamma Natural radiation from the surrounding rock Helps separate clay from sand and gravel, which hold and transmit water very differently
Normal resistivity Electrical resistivity of rock, water and pore space Highlights layers that are likely to be water-bearing
Fluid resistivity How much dissolved material the water in the hole contains Shows where water quality changes with depth
Temperature Temperature profile down the hole Can reveal where water enters or leaves the borehole
Caliper Diameter of the hole along its length Checks hole condition, so the other logs can be read correctly
Flowmeter Vertical movement of water inside the hole Locates the productive fractures or layers

Surface geophysics: choosing the spot

Drilling is expensive, so you want to drill where the odds are best. Surface geophysics helps by mapping the subsurface before the rig moves in. The US Geological Survey describes a range of methods used in groundwater work, including shallow direct-current resistivity sounding, two-dimensional resistivity with roll-along capability, time-domain electromagnetic surveys and very low frequency electromagnetic measurements.

Resistivity imaging

Wet, saline or clay-rich layers conduct electricity better than dry or hard rock. Resistivity imaging builds a cross-section that can show weathered zones, fractures and the boundary of a saturated aquifer. Our article on electrical resistivity imaging explains how the result is read.

Electromagnetic and magnetic methods

Electromagnetic methods cover ground quickly and can map conductive zones without touching the surface. Magnetic surveys help identify dykes, faults and rock contacts that can channel or block water. If you are comparing options, our guide to magnetic surveys for groundwater sets out where they add most value.

How borehole siting works, step by step

Good siting is a process, not a hunch. A typical approach looks like this:

  1. Define the goal. Is the borehole for domestic supply, irrigation, industry or monitoring? The target yield and quality change the whole plan.
  2. Review what is known. Check existing boreholes, geology and water levels in the area.
  3. Survey the ground. Use geophysics to find the most promising zones and avoid unhelpful ones.
  4. Drill and log. Confirm the target with core samples and borehole measurements.
  5. Test the yield. Pumping tests show how much water the hole can sustain over time.
  6. Decide with evidence. Use the combined results to set the depth, casing and pump design.

The Council for Geoscience lists groundwater exploration (borehole siting) and groundwater pollution plume mapping among its scientific services, which shows how central this work is to South African water security.

Why water sometimes disappoints

Even a well-sited borehole can underperform. Common reasons include a fractured aquifer that is smaller than expected, a layer of clay that blocks the flow, or water that becomes saltier as it is pumped. The fix often starts with understanding the aquifer, not with drilling deeper. Our article on water scarcity and geohydrological consulting explores how this understanding helps communities and businesses plan. Water quality can also change over time, which is why groundwater quality monitoring is worth building into the plan from the start.

Models can help too. Our overview of groundwater modelling explains how predictions of aquifer behaviour support sustainable abstraction.

Regulation and the bigger picture

In South Africa, the Department of Water and Sanitation is the custodian of the country’s water resources. Groundwater rules are changing: according to the department’s own news, the draft National Water Act regulations on the protection and management of groundwater appeared in the Government Gazette dated 10 December 2025, and before that the country had no dedicated groundwater regulations. Always check the current requirements for your area and purpose with the relevant authority or a qualified professional.

What a good borehole report contains

Whoever does the work, the final report should let a non-specialist understand the decision. Look for:

  • The location, method and date of each survey, drilling and test.
  • A log of the layers encountered, with depths and descriptions.
  • The water strikes: where water was found and at what depth.
  • Pumping test results, including yield and water level recovery.
  • Water quality results, compared with the intended use.
  • A clear statement of uncertainties and what could change the conclusion.
  • Recommendations for casing, pump design and future monitoring.

Four myths about borehole surveys

  • “A diviner is just as good.” Dowsing results cannot be checked against measured geology, which is why professional surveys rely on measurable data.
  • “Deeper always means more water.” Water moves through specific fractures and layers, not evenly through depth.
  • “If the first hole is dry, the site is useless.” A dry hole often teaches you where the aquifer is not, which narrows the next attempt.
  • “Water quality is always fine if the yield is good.” High yield does not guarantee safe water. Test before use.

Questions to ask before you commission a survey

  • What is the water for, and how much do you need each day?
  • Which methods will you use, and why those methods for this geology?
  • How will the geophysics be checked against drilling?
  • What will the report include, and who signs it?
  • What happens if the first borehole is dry?

Frequently asked questions

How deep should a borehole be?

There is no universal depth. It depends on the geology, the target aquifer and the yield you need. Logging and testing during drilling are what confirm the right depth on site.

Is a borehole survey the same as a geotechnical investigation?

No. A borehole survey focuses on water and groundwater properties. A geotechnical investigation focuses on how soil and rock will behave under a structure. Some projects need both.

Do I need a survey for a small household borehole?

A survey greatly improves your odds, and the cost of a dry hole can exceed the cost of a well-planned survey. Ask a qualified professional what is appropriate for your site.

Can geophysics guarantee water?

No method can guarantee water. Geophysics improves the odds and helps you avoid poor locations, but drilling and testing still confirm the result.

How long does a borehole survey take?

Desk review and surface geophysics can be completed in days or weeks. Drilling, logging and pumping tests add time, depending on depth and access.

Key takeaways

  • Use surface geophysics to choose the drilling spot, then confirm with logging and drilling.
  • Borehole logs turn one hole into a detailed picture of water-bearing layers.
  • Test yield and water quality before relying on a borehole.
  • Plan for monitoring, because aquifers change over time.

Need help planning a borehole or groundwater study? Contact us for an honest discussion about your goals. You can also explore our geohydrological consulting page, or start with our wider geological exploration guide to understand the full picture.